產品資訊
- 首頁
- 產品資訊
- USB 8051 Flash MCU
- 84 SERIES
- MG84FL54BD
84 SERIES
MG84FL54BD
1-T 8051 CPU Core- 16K bytes of on-chip Flash program memory with ISP/IAP function
- 256 bytes internal scratch-pad RAM and 576bytes on-chip expanded RAM (XRAM)
- Dual DPTR (Data Pointer register)
- Four and half configurable I/O ports
- Three 16-bit Timers
- Enhanced UART
- Two-priority-level interrupt structure
- Additional external interrupts, INT2 and INT3
- Keypad interrupt (P0)
- Wake-up from power-down mode
- Serial Peripheral Interface (SPI)
- 2-wire Serial Interface (TWSI)
- One-time-enabled Watch-dog Timer (WDT)
- Programmable system clock
- USB specification 2.0 and 1.1 compliant
Built in full speed (12Mbps) USB transceiver- Intel 8X931 like USB control flow
- One 256 bytes FIFO for USB endpoint-shared buffer
- Maximum 64 bytes data for EP0 control-in/out buffer
- Maximum 64 bytes data for EP1 bulk/interrupt-in buffer
- Maximum 64 bytes data for EP2 bulk/interrupt/isochronous-in buffer, it could be configured to two 32 bytes dual-buffer-mode in bulk and isochronous operating.
- Maximum 64 bytes data for EP3 bulk/interrupt/isochronous-out buffer, it could be configured to two 32 bytes dual-buffer-mode in bulk and isochronous operating. Additionally, it also can be configured to an interrupt-in buffer on EP3 function.
- Supports USB suspend/resume and remote wake-up
- Software-controlled USB connection/disconnection mechanism
- Support USB DFU (Device Firmware Update), EasyCOM , EasyPOD
- Power saving modes :
- Idle mode
- Power-down mode
- Operating condition :
- Operating voltage: 2.4 ~ 5.5V on VDD_IO, 2.7V ~ 3.6V on VDD_Core and VDD_PLL, 3.0V~3.6V on VDDA.
- Operating speed range: DC to 24MHz @VCC>3.0V
